A 3D-printable phone mount purpose-built for the URLIFE T2 e-bike's Bike Box — no bulky clamp, no fogging case, just a clean TPU mount sized for large and rugged phones. Instant STL download, designed and tested on a real URLIFE T2 setup.
Download our 3D printed phone holder STL file, custom-designed for the URLIFE T2 E-Bike Bike Box. Flexible TPU mount fits large & rugged phones. Instant download.
A 3D-printable phone mount purpose-built for the URLIFE T2 e-bike's Bike Box — designed after struggling to find a holder that actually fit. This is an open TPU mount, not an enclosed case, so it clips straight onto the Bike Box without a bulky third-party clamp or a cover that fogs up your screen mid-ride.
Developed in collaboration between Devmods (@audio-dev) and Retrosheep, and tested on a real URLIFE T2 e-bike setup rather than only modelled on screen.
Why this mount works:
Flexes to grip, not snap. Designed specifically for TPU filament — its flex is what lets the mount grip and release your phone. Printing in rigid PLA or PETG will not work correctly.
Adapts to your phone size. Fit against the Bike Box is set by the printed holder's length relative to your phone, so it isn't a single fixed mould.
Built around large, rugged phones. An open mount rather than an enclosed case, so waterproof phones (Doogee-style rugged models) stay visible and fog-free for navigation.
Proper fixing, not screwed into plastic. Both parts include pre-drilled holes for heat-set inserts, giving a secure, reusable fixing point.
Two parts, ~6 hours total print time, resulting in a mount that holds firm on rough roads once fitted.
Comes with a fitted demo video showing the mount installed on a real URLIFE T2 Bike Box before you commit to printing.
Print Settings
Layer height: 0.28mm or 0.20mm (~6 hrs); 0.16mm for finer detail (~12 hrs)
Infill: 20%
Supports: enabled for all overhangs
Filament: TPU (flexible) — required, not optional
Printer/temp tested on: Creality CR-10 with Direct Drive extruder, 220°C
Speed: 100mm/s infill, 50mm/s outer wall
Fixing holes: 2mm at base tapering to 6mm at top, sized for 2mm hex-head heat-insert screws (4mm+ also works; base left at 4mm thickness)
What's included
STL files for both printed parts, designed and tested specifically for the URLIFE T2 E-Bike Bike Box. Compatible with standard heat-set threaded inserts (not included).
Licence
Retrosheep Members get a discount across the whole store — and right now you can join for a one-off £1 fee, for a limited time. If you're picking this up, it's worth joining before you check out.
Technical Specs Table
Attribute Value
Product Type Digital 3D print file (STL)
Compatibility URLIFE T2 E-Bike Bike Box
Recommended Material TPU (flexible filament) — required
Print Time (combined)~6 hours at 0.20–0.28mm layer height
Infill 20%
Fixing Hardware Heat-set threaded inserts, 2mm hex-head screws (not included)
File Format STL, 2-part print
Delivery Method Instant digital downloadLicencePersonal use only
— no resale/redistribution
Price £6.99 GBP
Availability In stock (digital, unlimited)
Shipping None — digital download
A 3D-printable phone mount purpose-built for the URLIFE T2 e-bike's Bike Box — no bulky clamp, no fogging case, just a clean TPU mount sized for large and rugged phones. Instant STL download, designed and tested on a real URLIFE T2 setup.
Download our 3D printed phone holder STL file, custom-designed for the URLIFE T2 E-Bike Bike Box. Flexible TPU mount fits large & rugged phones. Instant download.
A 3D-printable phone mount purpose-built for the URLIFE T2 e-bike's Bike Box — designed after struggling to find a holder that actually fit. This is an open TPU mount, not an enclosed case, so it clips straight onto the Bike Box without a bulky third-party clamp or a cover that fogs up your screen mid-ride.
Developed in collaboration between Devmods (@audio-dev) and Retrosheep, and tested on a real URLIFE T2 e-bike setup rather than only modelled on screen.
Why this mount works:
Flexes to grip, not snap. Designed specifically for TPU filament — its flex is what lets the mount grip and release your phone. Printing in rigid PLA or PETG will not work correctly.
Adapts to your phone size. Fit against the Bike Box is set by the printed holder's length relative to your phone, so it isn't a single fixed mould.
Built around large, rugged phones. An open mount rather than an enclosed case, so waterproof phones (Doogee-style rugged models) stay visible and fog-free for navigation.
Proper fixing, not screwed into plastic. Both parts include pre-drilled holes for heat-set inserts, giving a secure, reusable fixing point.
Two parts, ~6 hours total print time, resulting in a mount that holds firm on rough roads once fitted.
Comes with a fitted demo video showing the mount installed on a real URLIFE T2 Bike Box before you commit to printing.
Print Settings
Layer height: 0.28mm or 0.20mm (~6 hrs); 0.16mm for finer detail (~12 hrs)
Infill: 20%
Supports: enabled for all overhangs
Filament: TPU (flexible) — required, not optional
Printer/temp tested on: Creality CR-10 with Direct Drive extruder, 220°C
Speed: 100mm/s infill, 50mm/s outer wall
Fixing holes: 2mm at base tapering to 6mm at top, sized for 2mm hex-head heat-insert screws (4mm+ also works; base left at 4mm thickness)
What's included
STL files for both printed parts, designed and tested specifically for the URLIFE T2 E-Bike Bike Box. Compatible with standard heat-set threaded inserts (not included).
Licence
Retrosheep Members get a discount across the whole store — and right now you can join for a one-off £1 fee, for a limited time. If you're picking this up, it's worth joining before you check out.
Technical Specs Table
Attribute Value
Product Type Digital 3D print file (STL)
Compatibility URLIFE T2 E-Bike Bike Box
Recommended Material TPU (flexible filament) — required
Print Time (combined)~6 hours at 0.20–0.28mm layer height
Infill 20%
Fixing Hardware Heat-set threaded inserts, 2mm hex-head screws (not included)
File Format STL, 2-part print
Delivery Method Instant digital downloadLicencePersonal use only
— no resale/redistribution
Price £6.99 GBP
Availability In stock (digital, unlimited)
Shipping None — digital download
Image 1 of 20
Image 2 of 20
Image 3 of 20
Image 4 of 20
Image 5 of 20
Image 6 of 20
Image 7 of 20
Image 8 of 20
Image 9 of 20
Image 10 of 20
Image 11 of 20
Image 12 of 20
Image 13 of 20
Image 14 of 20
Image 15 of 20
Image 16 of 20
Image 17 of 20
Image 18 of 20
Image 19 of 20
Image 20 of 20
